About this Floral Monogram Q embroidery pattern
Floral Monogram Q brings floral details into a hand-embroidery composition. Study the colored design and outline together before choosing which shapes to shade, outline or simplify. The supplied guide identifies these motifs: large serif capital Q in deep plum and burgundy with a curling lower tail, several asymmetrical clusters of burgundy and dusty-rose blossoms, olive-taupe fronds, near-black foliage, and a large wine satin ribbon tied beneath the hoop. Stitches: long-and-short / satin for the letter; woven wheel / bullion or layered satin for roses; fishbone for leaves; stem, split, French knot and lazy daisy for tiny branches and centers. Ribbon: the satin bow in the photo is a separate finishing embellishment, not an embroidery-floss color fill. SUGGESTED DMC PALETTE - 16 COLORS DMC COLOR / SWATCH DESIGN PLACEMENT PRIMARY STITCH STR. 154 ■ Grape - Very Dark Deep plum shadow in letter and rolled roses Long-short / Woven 2 814 ■ Garnet - Dark Main dark wine-red letter and petals Long-short / Satin 2 815 ■ Garnet - Medium Letter light planes and berry petals Long-short 2 816 ■ Garnet Warm burgundy flower highlights Satin / Woven 2 902 ■ Garnet - Very Dark Dark rose petals and monogram depth Long-short 2 221 ■ Shell Pink - Very Dark Dusty rose coils and transitions Woven / Satin 2 223 ■ Shell Pink - Light Pink highlights along central rose Woven / Satin 2 224 ■ Shell Pink - Very Light Pale rim lights on dimensional rose Straight / Satin 1 310 ■ Black Near-black leaf shadows and flower center Fishbone / Knot 1-2 3799 ■ Pewter Gray - Very Dark Dark charcoal foliage highlights Fishbone 1-2 934 ■ Avocado Green - Black Dark green stems and foliage Fishbone / Stem 1-2 3031 ■ Mocha Brown - Very Dark Dark muted twig lines and leaf shade Stem / Split 1 840 ■ Beige Brown - Medium Taupe feathery foliage on each side Fishbone 1-2 841 ■ Beige Brown - Light Light taupe fronds and leaf highlights Straight / Fishbone 1-2 3852 ■ Straw - Very Dark Tiny golden flower centers French knot 1-2 3685 ■ Mauve - Very Dark Small wine berries and buds French knot / Satin 1-2 STITCHING SEQUENCE # PHASE ARTWORK-SPECIFIC EXECUTION 1 Trace the monogram Transfer the ornate serif Q, including its bowl and curling tail, then map rose placement and foliage boundaries. Keep serif edges smooth. 2 Fill the letter Use direction-controlled long-and-short or narrow satin stitches in 154/814/815/902; stitch around the letter bowl and along its curved lower tail without burying the floral overlaps. 3 Build dimensional roses Work the prominent coiled blooms using woven-wheel or layered satin stitches in 221/223/224 and 815/816; shade deeper petals with 902. 4 Add supporting flowers Stitch smaller burgundy blossoms, mauve buds and clustered berries in 814/816/3685. Place tiny 3852 French knots at visible golden centers. 5 Complete botanical sprays Add dark green/charcoal leaves using 934/310/3799; stitch pale taupe fronds with 840/841 and finish twig lines in 3031. 6 Finish hoop & ribbon Refine the Q edges and petal spirals, remove marks and gently block. Finish the hoop and attach a separately purchased satin bow below; avoid compressing embroidery. THREAD DIRECTION, STRAND MAP & FINISHING QC Monogram Q: 2 strands, angled short stitches following each curved stroke; keep straight serif boundaries clean. Rolled roses: 2 strands woven in tight spirals, with darker inner coils and pale highlights outward. Petals and buds: 1-2 strands satin / long-short, overlapping layers naturally. Foliage: 1-2 strands fishbone from midrib to leaf margin; 1 strand for fine side shoots. Centers: small raised French knots. Final QC: preserve Q legibility beneath bouquets, maintain floral symmetry without making the sprays identical, and attach satin ribbon separately after hoop finishing. DMC shades are visually suggested from the supplied artwork; verify against a physical DMC color card before production.
The colored image is a design reference. Thread, fabric and your stitch choices will affect the finished result. Preserve the open spaces around the smaller motifs and test difficult fills on a spare piece of fabric before stitching the main design.
Printable outline preview
This watermarked preview shows the transfer drawing. Clean outlines are included in the purchased pattern PDF.
Choose your hoop size
The outline pages are labeled for 3, 4, 5, 6, 7, 8 inch hoops. Measure the printed design before transfer, because printer margins and fit-to-page settings can affect its dimensions.
A larger version gives fine contours and clustered motifs more room. Select the size that preserves the details you want to stitch.
Color and stitch guidance
The supplied PDF contains the design's DMC color suggestions and stitching guidance. Compare important shades with real floss under your working light.
The supplied guide labels this design intermediate. Allow time for controlled spacing and detailed areas.
warm white medium-weight cotton or linen with a light stabilizer supporting dense letter filling and
Stitching sequence
- Trace the monogram Transfer the ornate serif Q, including its bowl and curling tail, then map rose placement and foliage boundaries. Keep serif edges smooth.
- Fill the letter Use direction-controlled long-and-short or narrow satin stitches in 154/814/815/902; stitch around the letter bowl and along its curved lower tail without burying the floral overlaps.
- Build dimensional roses Work the prominent coiled blooms using woven-wheel or layered satin stitches in 221/223/224 and 815/816; shade deeper petals with 902.
- Add supporting flowers Stitch smaller burgundy blossoms, mauve buds and clustered berries in 814/816/3685. Place tiny 3852 French knots at visible golden centers.
- Complete botanical sprays Add dark green/charcoal leaves using 934/310/3799; stitch pale taupe fronds with 840/841 and finish twig lines in 3031.
- Finish hoop & ribbon Refine the Q edges and petal spirals, remove marks and gently block. Finish the hoop and attach a separately purchased satin bow below; avoid compressing embroidery. THREAD DIRECTION, STRAND MAP & FINISHING QC Monogram Q: 2 strands, angled short stitches following each curved stroke; keep straight serif boundaries clean. Rolled roses: 2 strands woven in tight spirals, with darker inner coils and pale highlights outward. Petals and buds: 1-2 strands satin / long-short, overlapping layers naturally. Foliage: 1-2 strands fishbone from midrib to leaf margin; 1 strand for fine side shoots. Centers: small raised French knots
Review the full guide in your download for motif-specific thread placement. General techniques are covered in pattern transfer methods and finishing an embroidery hoop.
What your download contains
Your purchase opens a private Google Drive folder containing the three listed PDFs. The clean outline is inside the main pattern PDF. The gridded image reference is separate from the surface-embroidery drawing and is not a machine embroidery file or a symbol-by-symbol DMC cross-stitch key.
Download access appears after payment is confirmed, with recovery available through the purchase email. See the delivery policy for access and support details.
Pattern questions
Is this for hand embroidery?
Yes. The outline and stitching guide are for hand embroidery. No machine-ready PES or DST file is included.
Will I receive a physical kit?
No. This is a digital pattern package. Hoops, needles, thread, fabric and a finished piece are not included.
Can I sell a finished embroidery piece?
You may sell small quantities of physical pieces stitched by you under the pattern license. You may not resell or share the digital pattern files.
What if I cannot open or download the files?
Use order recovery or contact support with your order reference. Damaged files, duplicate purchases and delivery problems are covered in the refund policy.


