Botanical / Insects

Blush Botanical Moth

Hand embroidery pattern PDF

US$2.00

, pale buds, and brightest stitched accents. 822 Beige Gray Light Warm neutral fills, muted wing cells, and soft floral shading. 3362 Pine Green Dark Deep leaf shadows, dark berries, and strongest green wing spots. 3012 Khaki Green Medium Main olive leaves, stems, curls, and medium botanical shading. 3013 Khaki Green Light Leaf highlights, pale berries, and lighter moth markings. 503 Blue Green Medium Main cool sage leaves and selected upper botanical branches. 504 Blue Green Very Light Cool leaf highlights and soft green transitions. 3722 Shell Pink Medium Deeper pink wing spots, bud bases, and body shading. Optional refinement: Blend one strand of 761 with one strand of 3713 for the dusty rose areas, and one strand of 3012 with one strand of 3013 for naturally varied olive foliage. Stitch Plan by Design Area Moth outline and wing divisions Use one or two strands of split stitch or tight stem stitch in DMC 3371 or 3021. Keep the line smooth and slightly heavier around the outside edge than inside the wing panels. Large wing panels Blush Botanical Moth Embroidery Page 3 Fill broad areas with short-and-long stitch in 3713, 225, 822, and 3865. Follow the direction of each panel so the wing structure remains readable. Dots, ovals, and decorative motifs Use satin stitch for larger pink and green circles, padded satin stitch for raised spots, and tiny seed stitches or French knots for the smallest accents. Wing veins and fine pattern lines Work with one strand in back stitch, split stitch, or couching. Curve each line gently toward the wing edge instead of making rigid straight segments. Body and antennae Use horizontal satin or long-and-short bands on the body, alternating pink, cream, and green. Stitch the antennae in one-strand stem stitch, adding tiny straight stitches along the sides. Leaves and stems Use fishbone stitch for medium leaves and long-and-short stitch for larger ones. Stem stitch suits the branches and decorative curls. Buds, berries, and small dots Use detached chain, padded satin, or short-and-long stitch for buds. French knots and colonial knots work well for the scattered green dots. Thread Count & Blending Guide Area Strands Guidance Fine veins, antennae, tiny stems 1 Preserves clean curves and avoids heavy outlines. Main wing fills, leaves, buds 2 Provides smooth coverage while keeping the design delicate. Raised dots and padded spots 2–3 Use only where extra dimension is visible. 761 + 3713 1 + 1 Creates a soft dusty-pink blend for wings and buds. 3012 + 3013 1 + 1 Produces natural olive variation in leaves. 503 + 504 1 + 1 Gives the cooler sage foliage a gentle gradient. 822 + 3865 1 + 1 Softens cream motifs without making them flat white. Outlining, Shading & Texture Suggestions 1 Keep the outline selective: define the moth silhouette and key wing compartments clearly, but leave tiny interior shapes lighter. 1 Shade from the body outward: place slightly deeper pinks and greens near the wing bases, then lighten toward the edges. 1 Vary leaf direction: angle fishbone stitches toward each leaf tip and change the slant from leaf to leaf. 1 Mix flat and raised texture: smooth satin areas contrast beautifully with French knots, padded spots, and stitched leaf veins. 1 Preserve the ivory ground: avoid overfilling around the wreath; the negative space is part of the design. Blush Botanical Moth Embroidery Page 4 Beginner-Friendly Stitching Tips 1 Transfer the moth first and check both wing tips are level before tracing the surrounding branches. 1 Use a size 7 or 8 embroidery needle for two-strand work and a finer needle for one-strand veins. 1 Keep the fabric evenly taut, but loosen the hoop between stitching sessions to prevent permanent marks. 1 Work with 35–40 cm thread lengths to reduce tangling and keep satin stitches smooth. 1 Stitch matching left and right wing sections in pairs so color placement stays balanced. 1 Step back often; symmetrical designs reveal uneven spacing more clearly from a distance. Quick Working Recipe 1 Transfer the moth, main branches, buds, and decorative dots onto prepared natural fabric. 2 Outline the moth silhouette, body divisions, and major wing panels with fine split stitch. 3 Fill the body and broad pale wing sections, working from central shapes toward the outer edges. 4 Add pink and green spots, cream ovals, and the smaller decorative wing motifs. 5 Stitch the fine wing veins and antennae with one strand after the fills are complete. 6 Work the surrounding stems, then build leaves from dark bases to lighter tips. 7 Add buds, berries, French knots, and curled stem details last. 8 Remove transfer marks, check symmetry, and add a few final pale highlights where needed.

Beginner / 3, 4, 5, 6, 7, 8 inch outlines / 3 PDF files

Digital files only. No physical item is shipped.

  • Printable outline pattern8 pages PDF
  • DMC color and stitch guide4 pages PDF
  • Optional gridded visual reference3 pages PDF

About this Blush Botanical Moth embroidery pattern

Blush Botanical Moth brings botanical and insects details into a hand-embroidery composition. Study the colored design and outline together before choosing which shapes to shade, outline or simplify. The supplied guide identifies these motifs: , pale buds, and brightest stitched accents. 822 Beige Gray Light Warm neutral fills, muted wing cells, and soft floral shading. 3362 Pine Green Dark Deep leaf shadows, dark berries, and strongest green wing spots. 3012 Khaki Green Medium Main olive leaves, stems, curls, and medium botanical shading. 3013 Khaki Green Light Leaf highlights, pale berries, and lighter moth markings. 503 Blue Green Medium Main cool sage leaves and selected upper botanical branches. 504 Blue Green Very Light Cool leaf highlights and soft green transitions. 3722 Shell Pink Medium Deeper pink wing spots, bud bases, and body shading. Optional refinement: Blend one strand of 761 with one strand of 3713 for the dusty rose areas, and one strand of 3012 with one strand of 3013 for naturally varied olive foliage. Stitch Plan by Design Area Moth outline and wing divisions Use one or two strands of split stitch or tight stem stitch in DMC 3371 or 3021. Keep the line smooth and slightly heavier around the outside edge than inside the wing panels. Large wing panels Blush Botanical Moth Embroidery Page 3 Fill broad areas with short-and-long stitch in 3713, 225, 822, and 3865. Follow the direction of each panel so the wing structure remains readable. Dots, ovals, and decorative motifs Use satin stitch for larger pink and green circles, padded satin stitch for raised spots, and tiny seed stitches or French knots for the smallest accents. Wing veins and fine pattern lines Work with one strand in back stitch, split stitch, or couching. Curve each line gently toward the wing edge instead of making rigid straight segments. Body and antennae Use horizontal satin or long-and-short bands on the body, alternating pink, cream, and green. Stitch the antennae in one-strand stem stitch, adding tiny straight stitches along the sides. Leaves and stems Use fishbone stitch for medium leaves and long-and-short stitch for larger ones. Stem stitch suits the branches and decorative curls. Buds, berries, and small dots Use detached chain, padded satin, or short-and-long stitch for buds. French knots and colonial knots work well for the scattered green dots. Thread Count & Blending Guide Area Strands Guidance Fine veins, antennae, tiny stems 1 Preserves clean curves and avoids heavy outlines. Main wing fills, leaves, buds 2 Provides smooth coverage while keeping the design delicate. Raised dots and padded spots 2–3 Use only where extra dimension is visible. 761 + 3713 1 + 1 Creates a soft dusty-pink blend for wings and buds. 3012 + 3013 1 + 1 Produces natural olive variation in leaves. 503 + 504 1 + 1 Gives the cooler sage foliage a gentle gradient. 822 + 3865 1 + 1 Softens cream motifs without making them flat white. Outlining, Shading & Texture Suggestions 1 Keep the outline selective: define the moth silhouette and key wing compartments clearly, but leave tiny interior shapes lighter. 1 Shade from the body outward: place slightly deeper pinks and greens near the wing bases, then lighten toward the edges. 1 Vary leaf direction: angle fishbone stitches toward each leaf tip and change the slant from leaf to leaf. 1 Mix flat and raised texture: smooth satin areas contrast beautifully with French knots, padded spots, and stitched leaf veins. 1 Preserve the ivory ground: avoid overfilling around the wreath; the negative space is part of the design. Blush Botanical Moth Embroidery Page 4 Beginner-Friendly Stitching Tips 1 Transfer the moth first and check both wing tips are level before tracing the surrounding branches. 1 Use a size 7 or 8 embroidery needle for two-strand work and a finer needle for one-strand veins. 1 Keep the fabric evenly taut, but loosen the hoop between stitching sessions to prevent permanent marks. 1 Work with 35–40 cm thread lengths to reduce tangling and keep satin stitches smooth. 1 Stitch matching left and right wing sections in pairs so color placement stays balanced. 1 Step back often; symmetrical designs reveal uneven spacing more clearly from a distance. Quick Working Recipe 1 Transfer the moth, main branches, buds, and decorative dots onto prepared natural fabric. 2 Outline the moth silhouette, body divisions, and major wing panels with fine split stitch. 3 Fill the body and broad pale wing sections, working from central shapes toward the outer edges. 4 Add pink and green spots, cream ovals, and the smaller decorative wing motifs. 5 Stitch the fine wing veins and antennae with one strand after the fills are complete. 6 Work the surrounding stems, then build leaves from dark bases to lighter tips. 7 Add buds, berries, French knots, and curled stem details last. 8 Remove transfer marks, check symmetry, and add a few final pale highlights where needed.

The colored image is a design reference. Thread, fabric and your stitch choices will affect the finished result. Preserve the open spaces around the smaller motifs and test difficult fills on a spare piece of fabric before stitching the main design.

Printable outline preview

This watermarked preview shows the transfer drawing. Clean outlines are included in the purchased pattern PDF.

Choose your hoop size

The outline pages are labeled for 3, 4, 5, 6, 7, 8 inch hoops. Measure the printed design before transfer, because printer margins and fit-to-page settings can affect its dimensions.

A larger version gives fine contours and clustered motifs more room. Select the size that preserves the details you want to stitch.

Color and stitch guidance

The supplied PDF contains the design's DMC color suggestions and stitching guidance. Compare important shades with real floss under your working light.

The supplied guide labels this design beginner. Allow time for controlled spacing and detailed areas.

Stitching sequence

  1. Choose an outline size for Blush Botanical Moth, print it and measure the result before transferring the drawing to taut fabric.
  2. Consult the supplied DMC and stitching guide before starting. Work structural outlines and larger shapes before small overlapping details.
  3. Follow the design reference for spacing and the guide for stitch direction. Keep thread tension even and check that dense areas do not pull the ground fabric.
  4. Finish fine accents, secure thread ends and remove transfer marks according to the marking product's instructions.

Review the full guide in your download for motif-specific thread placement. General techniques are covered in pattern transfer methods and finishing an embroidery hoop.

What your download contains

Your purchase opens a private Google Drive folder containing the three listed PDFs. The clean outline is inside the main pattern PDF. The gridded image reference is separate from the surface-embroidery drawing and is not a machine embroidery file or a symbol-by-symbol DMC cross-stitch key.

Download access appears after payment is confirmed, with recovery available through the purchase email. See the delivery policy for access and support details.

Pattern questions

Is this for hand embroidery?

Yes. The outline and stitching guide are for hand embroidery. No machine-ready PES or DST file is included.

Will I receive a physical kit?

No. This is a digital pattern package. Hoops, needles, thread, fabric and a finished piece are not included.

Can I sell a finished embroidery piece?

You may sell small quantities of physical pieces stitched by you under the pattern license. You may not resell or share the digital pattern files.

What if I cannot open or download the files?

Use order recovery or contact support with your order reference. Damaged files, duplicate purchases and delivery problems are covered in the refund policy.

More botanical patterns